- Language: en
Django’s cache framework¶
A fundamental trade-off in dynamic websites is, well, they’re dynamic. Each time a user requests a page, the web server makes all sorts of calculations – from database queries to template rendering to business logic – to create the page that your site’s visitor sees. This is a lot more expensive, from a processing-overhead perspective, than your standard read-a-file-off-the-filesystem server arrangement.
For most web applications, this overhead isn’t a big deal. Most web
applications aren’t washingtonpost.com
or slashdot.org
; they’re small-
to medium-sized sites with so-so traffic. But for medium- to high-traffic
sites, it’s essential to cut as much overhead as possible.
That’s where caching comes in.
To cache something is to save the result of an expensive calculation so that you don’t have to perform the calculation next time. Here’s some pseudocode explaining how this would work for a dynamically generated web page:
given a URL, try finding that page in the cache
if the page is in the cache:
return the cached page
else:
generate the page
save the generated page in the cache (for next time)
return the generated page
Django comes with a robust cache system that lets you save dynamic pages so they don’t have to be calculated for each request. For convenience, Django offers different levels of cache granularity: You can cache the output of specific views, you can cache only the pieces that are difficult to produce, or you can cache your entire site.
Django also works well with “downstream” caches, such as Squid and browser-based caches. These are the types of caches that you don’t directly control but to which you can provide hints (via HTTP headers) about which parts of your site should be cached, and how.
See also
The Cache Framework design philosophy explains a few of the design decisions of the framework.
Setting up the cache¶
The cache system requires a small amount of setup. Namely, you have to tell it where your cached data should live – whether in a database, on the filesystem or directly in memory. This is an important decision that affects your cache’s performance; yes, some cache types are faster than others.
Your cache preference goes in the CACHES
setting in your
settings file. Here’s an explanation of all available values for
CACHES
.
Memcached¶
Memcached is an entirely memory-based cache server, originally developed to handle high loads at LiveJournal.com and subsequently open-sourced by Danga Interactive. It is used by sites such as Facebook and Wikipedia to reduce database access and dramatically increase site performance.
Memcached runs as a daemon and is allotted a specified amount of RAM. All it does is provide a fast interface for adding, retrieving and deleting data in the cache. All data is stored directly in memory, so there’s no overhead of database or filesystem usage.
After installing Memcached itself, you’ll need to install a Memcached binding. There are several Python Memcached bindings available; the two supported by Django are pylibmc and pymemcache.
To use Memcached with Django:
- Set
BACKEND
todjango.core.cache.backends.memcached.PyMemcacheCache
ordjango.core.cache.backends.memcached.PyLibMCCache
(depending on your chosen memcached binding) - Set
LOCATION
toip:port
values, whereip
is the IP address of the Memcached daemon andport
is the port on which Memcached is running, or to aunix:path
value, wherepath
is the path to a Memcached Unix socket file.
In this example, Memcached is running on localhost (127.0.0.1) port 11211, using
the pymemcache
binding:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.memcached.PyMemcacheCache",
"LOCATION": "127.0.0.1:11211",
}
}
In this example, Memcached is available through a local Unix socket file
/tmp/memcached.sock
using the pymemcache
binding:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.memcached.PyMemcacheCache",
"LOCATION": "unix:/tmp/memcached.sock",
}
}
One excellent feature of Memcached is its ability to share a cache over
multiple servers. This means you can run Memcached daemons on multiple
machines, and the program will treat the group of machines as a single
cache, without the need to duplicate cache values on each machine. To take
advantage of this feature, include all server addresses in
LOCATION
, either as a semicolon or comma
delimited string, or as a list.
In this example, the cache is shared over Memcached instances running on IP address 172.19.26.240 and 172.19.26.242, both on port 11211:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.memcached.PyMemcacheCache",
"LOCATION": [
"172.19.26.240:11211",
"172.19.26.242:11211",
],
}
}
In the following example, the cache is shared over Memcached instances running on the IP addresses 172.19.26.240 (port 11211), 172.19.26.242 (port 11212), and 172.19.26.244 (port 11213):
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.memcached.PyMemcacheCache",
"LOCATION": [
"172.19.26.240:11211",
"172.19.26.242:11212",
"172.19.26.244:11213",
],
}
}
By default, the PyMemcacheCache
backend sets the following options (you can
override them in your OPTIONS
):
"OPTIONS": {
"allow_unicode_keys": True,
"default_noreply": False,
"serde": pymemcache.serde.pickle_serde,
}
A final point about Memcached is that memory-based caching has a disadvantage: because the cached data is stored in memory, the data will be lost if your server crashes. Clearly, memory isn’t intended for permanent data storage, so don’t rely on memory-based caching as your only data storage. Without a doubt, none of the Django caching backends should be used for permanent storage – they’re all intended to be solutions for caching, not storage – but we point this out here because memory-based caching is particularly temporary.
Redis¶
Redis is an in-memory database that can be used for caching. To begin you’ll need a Redis server running either locally or on a remote machine.
After setting up the Redis server, you’ll need to install Python bindings for Redis. redis-py is the binding supported natively by Django. Installing the hiredis-py package is also recommended.
To use Redis as your cache backend with Django:
- Set
BACKEND
todjango.core.cache.backends.redis.RedisCache
. - Set
LOCATION
to the URL pointing to your Redis instance, using the appropriate scheme. See theredis-py
docs for details on the available schemes.
For example, if Redis is running on localhost (127.0.0.1) port 6379:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.redis.RedisCache",
"LOCATION": "redis://127.0.0.1:6379",
}
}
Often Redis servers are protected with authentication. In order to supply a
username and password, add them in the LOCATION
along with the URL:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.redis.RedisCache",
"LOCATION": "redis://username:password@127.0.0.1:6379",
}
}
If you have multiple Redis servers set up in the replication mode, you can specify the servers either as a semicolon or comma delimited string, or as a list. While using multiple servers, write operations are performed on the first server (leader). Read operations are performed on the other servers (replicas) chosen at random:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.redis.RedisCache",
"LOCATION": [
"redis://127.0.0.1:6379", # leader
"redis://127.0.0.1:6378", # read-replica 1
"redis://127.0.0.1:6377", # read-replica 2
],
}
}
Database caching¶
Django can store its cached data in your database. This works best if you’ve got a fast, well-indexed database server.
To use a database table as your cache backend:
- Set
BACKEND
todjango.core.cache.backends.db.DatabaseCache
- Set
LOCATION
totablename
, the name of the database table. This name can be whatever you want, as long as it’s a valid table name that’s not already being used in your database.
In this example, the cache table’s name is my_cache_table
:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.db.DatabaseCache",
"LOCATION": "my_cache_table",
}
}
Unlike other cache backends, the database cache does not support automatic
culling of expired entries at the database level. Instead, expired cache
entries are culled each time add()
, set()
, or touch()
is called.
Creating the cache table¶
Before using the database cache, you must create the cache table with this command:
python manage.py createcachetable
This creates a table in your database that is in the proper format that
Django’s database-cache system expects. The name of the table is taken from
LOCATION
.
If you are using multiple database caches, createcachetable
creates
one table for each cache.
If you are using multiple databases, createcachetable
observes the
allow_migrate()
method of your database routers (see below).
Like migrate
, createcachetable
won’t touch an existing
table. It will only create missing tables.
To print the SQL that would be run, rather than run it, use the
createcachetable --dry-run
option.
Multiple databases¶
If you use database caching with multiple databases, you’ll also need
to set up routing instructions for your database cache table. For the
purposes of routing, the database cache table appears as a model named
CacheEntry
, in an application named django_cache
. This model
won’t appear in the models cache, but the model details can be used
for routing purposes.
For example, the following router would direct all cache read
operations to cache_replica
, and all write operations to
cache_primary
. The cache table will only be synchronized onto
cache_primary
:
class CacheRouter:
"""A router to control all database cache operations"""
def db_for_read(self, model, **hints):
"All cache read operations go to the replica"
if model._meta.app_label == "django_cache":
return "cache_replica"
return None
def db_for_write(self, model, **hints):
"All cache write operations go to primary"
if model._meta.app_label == "django_cache":
return "cache_primary"
return None
def allow_migrate(self, db, app_label, model_name=None, **hints):
"Only install the cache model on primary"
if app_label == "django_cache":
return db == "cache_primary"
return None
If you don’t specify routing directions for the database cache model,
the cache backend will use the default
database.
And if you don’t use the database cache backend, you don’t need to worry about providing routing instructions for the database cache model.
Filesystem caching¶
The file-based backend serializes and stores each cache value as a separate
file. To use this backend set BACKEND
to
"django.core.cache.backends.filebased.FileBasedCache"
and
LOCATION
to a suitable directory. For example,
to store cached data in /var/tmp/django_cache
, use this setting:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.filebased.FileBasedCache",
"LOCATION": "/var/tmp/django_cache",
}
}
If you’re on Windows, put the drive letter at the beginning of the path, like this:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.filebased.FileBasedCache",
"LOCATION": "c:/foo/bar",
}
}
The directory path should be absolute – that is, it should start at the root of your filesystem. It doesn’t matter whether you put a slash at the end of the setting.
Make sure the directory pointed-to by this setting either exists and is
readable and writable, or that it can be created by the system user under which
your web server runs. Continuing the above example, if your server runs as the
user apache
, make sure the directory /var/tmp/django_cache
exists and
is readable and writable by the user apache
, or that it can be created by
the user apache
.
Warning
When the cache LOCATION
is contained within
MEDIA_ROOT
, STATIC_ROOT
, or
STATICFILES_FINDERS
, sensitive data may be exposed.
An attacker who gains access to the cache file can not only falsify HTML
content, which your site will trust, but also remotely execute arbitrary
code, as the data is serialized using pickle
.
Warning
Filesystem caching may become slow when storing a large number of files. If you run into this problem, consider using a different caching mechanism. You can also subclass FileBasedCache and improve the culling strategy.
Local-memory caching¶
This is the default cache if another is not specified in your settings file. If
you want the speed advantages of in-memory caching but don’t have the capability
of running Memcached, consider the local-memory cache backend. This cache is
per-process (see below) and thread-safe. To use it, set BACKEND
to "django.core.cache.backends.locmem.LocMemCache"
. For
example:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.locmem.LocMemCache",
"LOCATION": "unique-snowflake",
}
}
The cache LOCATION
is used to identify individual
memory stores. If you only have one locmem
cache, you can omit the
LOCATION
; however, if you have more than one local
memory cache, you will need to assign a name to at least one of them in
order to keep them separate.
The cache uses a least-recently-used (LRU) culling strategy.
Note that each process will have its own private cache instance, which means no cross-process caching is possible. This also means the local memory cache isn’t particularly memory-efficient, so it’s probably not a good choice for production environments. It’s nice for development.
Dummy caching (for development)¶
Finally, Django comes with a “dummy” cache that doesn’t actually cache – it just implements the cache interface without doing anything.
This is useful if you have a production site that uses heavy-duty caching in
various places but a development/test environment where you don’t want to cache
and don’t want to have to change your code to special-case the latter. To
activate dummy caching, set BACKEND
like so:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.dummy.DummyCache",
}
}
Using a custom cache backend¶
While Django includes support for a number of cache backends out-of-the-box,
sometimes you might want to use a customized cache backend. To use an external
cache backend with Django, use the Python import path as the
BACKEND
of the CACHES
setting, like so:
CACHES = {
"default": {
"BACKEND": "path.to.backend",
}
}
If you’re building your own backend, you can use the standard cache backends as reference implementations. You’ll find the code in the django/core/cache/backends/ directory of the Django source.
Note: Without a really compelling reason, such as a host that doesn’t support them, you should stick to the cache backends included with Django. They’ve been well-tested and are well-documented.
Cache arguments¶
Each cache backend can be given additional arguments to control caching
behavior. These arguments are provided as additional keys in the
CACHES
setting. Valid arguments are as follows:
TIMEOUT
: The default timeout, in seconds, to use for the cache. This argument defaults to300
seconds (5 minutes). You can setTIMEOUT
toNone
so that, by default, cache keys never expire. A value of0
causes keys to immediately expire (effectively “don’t cache”).OPTIONS
: Any options that should be passed to the cache backend. The list of valid options will vary with each backend, and cache backends backed by a third-party library will pass their options directly to the underlying cache library.Cache backends that implement their own culling strategy (i.e., the
locmem
,filesystem
anddatabase
backends) will honor the following options:MAX_ENTRIES
: The maximum number of entries allowed in the cache before old values are deleted. This argument defaults to300
.CULL_FREQUENCY
: The fraction of entries that are culled whenMAX_ENTRIES
is reached. The actual ratio is1 / CULL_FREQUENCY
, so setCULL_FREQUENCY
to2
to cull half the entries whenMAX_ENTRIES
is reached. This argument should be an integer and defaults to3
.A value of
0
forCULL_FREQUENCY
means that the entire cache will be dumped whenMAX_ENTRIES
is reached. On some backends (database
in particular) this makes culling much faster at the expense of more cache misses.
The Memcached and Redis backends pass the contents of
OPTIONS
as keyword arguments to the client constructors, allowing for more advanced control of client behavior. For example usage, see below.KEY_PREFIX
: A string that will be automatically included (prepended by default) to all cache keys used by the Django server.See the cache documentation for more information.
VERSION
: The default version number for cache keys generated by the Django server.See the cache documentation for more information.
KEY_FUNCTION
A string containing a dotted path to a function that defines how to compose a prefix, version and key into a final cache key.See the cache documentation for more information.
In this example, a filesystem backend is being configured with a timeout of 60 seconds, and a maximum capacity of 1000 items:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.filebased.FileBasedCache",
"LOCATION": "/var/tmp/django_cache",
"TIMEOUT": 60,
"OPTIONS": {"MAX_ENTRIES": 1000},
}
}
Here’s an example configuration for a pylibmc
based backend that enables
the binary protocol, SASL authentication, and the ketama
behavior mode:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.memcached.PyLibMCCache",
"LOCATION": "127.0.0.1:11211",
"OPTIONS": {
"binary": True,
"username": "user",
"password": "pass",
"behaviors": {
"ketama": True,
},
},
}
}
Here’s an example configuration for a pymemcache
based backend that enables
client pooling (which may improve performance by keeping clients connected),
treats memcache/network errors as cache misses, and sets the TCP_NODELAY
flag on the connection’s socket:
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.memcached.PyMemcacheCache",
"LOCATION": "127.0.0.1:11211",
"OPTIONS": {
"no_delay": True,
"ignore_exc": True,
"max_pool_size": 4,
"use_pooling": True,
},
}
}
Here’s an example configuration for a redis
based backend that selects
database 10
(by default Redis ships with 16 logical databases), and sets a
custom connection pool class (redis.ConnectionPool
is used by default):
CACHES = {
"default": {
"BACKEND": "django.core.cache.backends.redis.RedisCache",
"LOCATION": "redis://127.0.0.1:6379",
"OPTIONS": {
"db": "10",
"pool_class": "redis.BlockingConnectionPool",
},
}
}
The per-site cache¶
Once the cache is set up, the simplest way to use caching is to cache your
entire site. You’ll need to add
'django.middleware.cache.UpdateCacheMiddleware'
and
'django.middleware.cache.FetchFromCacheMiddleware'
to your
MIDDLEWARE
setting, as in this example:
MIDDLEWARE = [
"django.middleware.cache.UpdateCacheMiddleware",
"django.middleware.common.CommonMiddleware",
"django.middleware.cache.FetchFromCacheMiddleware",
]
Note
No, that’s not a typo: the “update” middleware must be first in the list, and the “fetch” middleware must be last. The details are a bit obscure, but see Order of MIDDLEWARE below if you’d like the full story.
Then, add the following required settings to your Django settings file:
CACHE_MIDDLEWARE_ALIAS
– The cache alias to use for storage.CACHE_MIDDLEWARE_SECONDS
– The integer number of seconds each page should be cached.CACHE_MIDDLEWARE_KEY_PREFIX
– If the cache is shared across multiple sites using the same Django installation, set this to the name of the site, or some other string that is unique to this Django instance, to prevent key collisions. Use an empty string if you don’t care.
FetchFromCacheMiddleware
caches GET and HEAD responses with status 200,
where the request and response headers allow. Responses to requests for the same
URL with different query parameters are considered to be unique pages and are
cached separately. This middleware expects that a HEAD request is answered with
the same response headers as the corresponding GET request; in which case it can
return a cached GET response for HEAD request.
Additionally, UpdateCacheMiddleware
automatically sets a few headers in
each HttpResponse
which affect downstream caches:
- Sets the
Expires
header to the current date/time plus the definedCACHE_MIDDLEWARE_SECONDS
. - Sets the
Cache-Control
header to give a max age for the page – again, from theCACHE_MIDDLEWARE_SECONDS
setting.
See Middleware for more on middleware.
If a view sets its own cache expiry time (i.e. it has a max-age
section in
its Cache-Control
header) then the page will be cached until the expiry
time, rather than CACHE_MIDDLEWARE_SECONDS
. Using the decorators in
django.views.decorators.cache
you can easily set a view’s expiry time
(using the cache_control()
decorator) or
disable caching for a view (using the
never_cache()
decorator). See the
using other headers section for more on these decorators.
If USE_I18N
is set to True
then the generated cache key will
include the name of the active language – see also
How Django discovers language preference). This allows you to easily
cache multilingual sites without having to create the cache key yourself.
Cache keys also include the current time zone when USE_TZ
is set to True
.
The per-view cache¶
-
django.views.decorators.cache.
cache_page
(timeout, *, cache=None, key_prefix=None)¶
A more granular way to use the caching framework is by caching the output of
individual views. django.views.decorators.cache
defines a cache_page
decorator that will automatically cache the view’s response for you:
from django.views.decorators.cache import cache_page
@cache_page(60 * 15)
def my_view(request): ...
cache_page
takes a single argument: the cache timeout, in seconds. In the
above example, the result of the my_view()
view will be cached for 15
minutes. (Note that we’ve written it as 60 * 15
for the purpose of
readability. 60 * 15
will be evaluated to 900
– that is, 15 minutes
multiplied by 60 seconds per minute.)
The cache timeout set by cache_page
takes precedence over the max-age
directive from the Cache-Control
header.
The per-view cache, like the per-site cache, is keyed off of the URL. If
multiple URLs point at the same view, each URL will be cached separately.
Continuing the my_view
example, if your URLconf looks like this:
urlpatterns = [
path("foo/<int:code>/", my_view),
]
then requests to /foo/1/
and /foo/23/
will be cached separately, as
you may expect. But once a particular URL (e.g., /foo/23/
) has been
requested, subsequent requests to that URL will use the cache.
cache_page
can also take an optional keyword argument, cache
,
which directs the decorator to use a specific cache (from your
CACHES
setting) when caching view results. By default, the
default
cache will be used, but you can specify any cache you
want:
@cache_page(60 * 15, cache="special_cache")
def my_view(request): ...
You can also override the cache prefix on a per-view basis. cache_page
takes an optional keyword argument, key_prefix
,
which works in the same way as the CACHE_MIDDLEWARE_KEY_PREFIX
setting for the middleware. It can be used like this:
@cache_page(60 * 15, key_prefix="site1")
def my_view(request): ...
The key_prefix
and cache
arguments may be specified together. The
key_prefix
argument and the KEY_PREFIX
specified under CACHES
will be concatenated.
Additionally, cache_page
automatically sets Cache-Control
and
Expires
headers in the response which affect downstream caches.
Specifying per-view cache in the URLconf¶
The examples in the previous section have hard-coded the fact that the view is
cached, because cache_page
alters the my_view
function in place. This
approach couples your view to the cache system, which is not ideal for several
reasons. For instance, you might want to reuse the view functions on another,
cache-less site, or you might want to distribute the views to people who might
want to use them without being cached. The solution to these problems is to
specify the per-view cache in the URLconf rather than next to the view functions
themselves.
You can do so by wrapping the view function with cache_page
when you refer
to it in the URLconf. Here’s the old URLconf from earlier:
urlpatterns = [
path("foo/<int:code>/", my_view),
]
Here’s the same thing, with my_view
wrapped in cache_page
:
from django.views.decorators.cache import cache_page
urlpatterns = [
path("foo/<int:code>/", cache_page(60 * 15)(my_view)),
]
Template fragment caching¶
If you’re after even more control, you can also cache template fragments using
the cache
template tag. To give your template access to this tag, put
{% load cache %}
near the top of your template.
The {% cache %}
template tag caches the contents of the block for a given
amount of time. It takes at least two arguments: the cache timeout, in seconds,
and the name to give the cache fragment. The fragment is cached forever if
timeout is None
. The name will be taken as is, do not use a variable. For
example:
{% load cache %}
{% cache 500 sidebar %}
.. sidebar ..
{% endcache %}
Sometimes you might want to cache multiple copies of a fragment depending on
some dynamic data that appears inside the fragment. For example, you might want a
separate cached copy of the sidebar used in the previous example for every user
of your site. Do this by passing one or more additional arguments, which may be
variables with or without filters, to the {% cache %}
template tag to
uniquely identify the cache fragment:
{% load cache %}
{% cache 500 sidebar request.user.username %}
.. sidebar for logged in user ..
{% endcache %}
If USE_I18N
is set to True
the per-site middleware cache will
respect the active language. For the cache
template
tag you could use one of the
translation-specific variables available in
templates to achieve the same result:
{% load i18n %}
{% load cache %}
{% get_current_language as LANGUAGE_CODE %}
{% cache 600 welcome LANGUAGE_CODE %}
{% translate "Welcome to example.com" %}
{% endcache %}
The cache timeout can be a template variable, as long as the template variable
resolves to an integer value. For example, if the template variable
my_timeout
is set to the value 600
, then the following two examples are
equivalent:
{% cache 600 sidebar %} ... {% endcache %}
{% cache my_timeout sidebar %} ... {% endcache %}
This feature is useful in avoiding repetition in templates. You can set the timeout in a variable, in one place, and reuse that value.
By default, the cache tag will try to use the cache called “template_fragments”.
If no such cache exists, it will fall back to using the default cache. You may
select an alternate cache backend to use with the using
keyword argument,
which must be the last argument to the tag.
{% cache 300 local-thing ... using="localcache" %}
It is considered an error to specify a cache name that is not configured.
-
django.core.cache.utils.
make_template_fragment_key
(fragment_name, vary_on=None)¶
If you want to obtain the cache key used for a cached fragment, you can use
make_template_fragment_key
. fragment_name
is the same as second argument
to the cache
template tag; vary_on
is a list of all additional arguments
passed to the tag. This function can be useful for invalidating or overwriting
a cached item, for example:
>>> from django.core.cache import cache
>>> from django.core.cache.utils import make_template_fragment_key
# cache key for {% cache 500 sidebar username %}
>>> key = make_template_fragment_key("sidebar", [username])
>>> cache.delete(key) # invalidates cached template fragment
True
The low-level cache API¶
Sometimes, caching an entire rendered page doesn’t gain you very much and is, in fact, inconvenient overkill.
Perhaps, for instance, your site includes a view whose results depend on several expensive queries, the results of which change at different intervals. In this case, it would not be ideal to use the full-page caching that the per-site or per-view cache strategies offer, because you wouldn’t want to cache the entire result (since some of the data changes often), but you’d still want to cache the results that rarely change.
For cases like this, Django exposes a low-level cache API. You can use this API to store objects in the cache with any level of granularity you like. You can cache any Python object that can be pickled safely: strings, dictionaries, lists of model objects, and so forth. (Most common Python objects can be pickled; refer to the Python documentation for more information about pickling.)
Accessing the cache¶
-
django.core.cache.
caches
¶ You can access the caches configured in the
CACHES
setting through a dict-like object:django.core.cache.caches
. Repeated requests for the same alias in the same thread will return the same object.>>> from django.core.cache import caches >>> cache1 = caches["myalias"] >>> cache2 = caches["myalias"] >>> cache1 is cache2 True
If the named key does not exist,
InvalidCacheBackendError
will be raised.To provide thread-safety, a different instance of the cache backend will be returned for each thread.
-
django.core.cache.
cache
¶ As a shortcut, the default cache is available as
django.core.cache.cache
:>>> from django.core.cache import cache
This object is equivalent to
caches['default']
.
Basic usage¶
The basic interface is:
-
cache.
set
(key, value, timeout=DEFAULT_TIMEOUT, version=None)¶
>>> cache.set("my_key", "hello, world!", 30)
-
cache.
get
(key, default=None, version=None)¶
>>> cache.get("my_key")
'hello, world!'
key
should be a str
, and value
can be any picklable Python object.
The timeout
argument is optional and defaults to the timeout
argument
of the appropriate backend in the CACHES
setting (explained above).
It’s the number of seconds the value should be stored in the cache. Passing in
None
for timeout
will cache the value forever. A timeout
of 0
won’t cache the value.
If the object doesn’t exist in the cache, cache.get()
returns None
:
>>> # Wait 30 seconds for 'my_key' to expire...
>>> cache.get("my_key")
None
If you need to determine whether the object exists in the cache and you have
stored a literal value None
, use a sentinel object as the default:
>>> sentinel = object()
>>> cache.get("my_key", sentinel) is sentinel
False
>>> # Wait 30 seconds for 'my_key' to expire...
>>> cache.get("my_key", sentinel) is sentinel
True
cache.get()
can take a default
argument. This specifies which value to
return if the object doesn’t exist in the cache:
>>> cache.get("my_key", "has expired")
'has expired'
-
cache.
add
(key, value, timeout=DEFAULT_TIMEOUT, version=None)¶
To add a key only if it doesn’t already exist, use the add()
method.
It takes the same parameters as set()
, but it will not attempt to
update the cache if the key specified is already present:
>>> cache.set("add_key", "Initial value")
>>> cache.add("add_key", "New value")
>>> cache.get("add_key")
'Initial value'
If you need to know whether add()
stored a value in the cache, you can
check the return value. It will return True
if the value was stored,
False
otherwise.
-
cache.
get_or_set
(key, default, timeout=DEFAULT_TIMEOUT, version=None)¶
If you want to get a key’s value or set a value if the key isn’t in the cache,
there is the get_or_set()
method. It takes the same parameters as get()
but the default is set as the new cache value for that key, rather than
returned:
>>> cache.get("my_new_key") # returns None
>>> cache.get_or_set("my_new_key", "my new value", 100)
'my new value'
You can also pass any callable as a default value:
>>> import datetime
>>> cache.get_or_set("some-timestamp-key", datetime.datetime.now)
datetime.datetime(2014, 12, 11, 0, 15, 49, 457920)
-
cache.
get_many
(keys, version=None)¶
There’s also a get_many()
interface that only hits the cache once.
get_many()
returns a dictionary with all the keys you asked for that
actually exist in the cache (and haven’t expired):
>>> cache.set("a", 1)
>>> cache.set("b", 2)
>>> cache.set("c", 3)
>>> cache.get_many(["a", "b", "c"])
{'a': 1, 'b': 2, 'c': 3}
-
cache.
set_many
(dict, timeout)¶
To set multiple values more efficiently, use set_many()
to pass a dictionary
of key-value pairs:
>>> cache.set_many({"a": 1, "b": 2, "c": 3})
>>> cache.get_many(["a", "b", "c"])
{'a': 1, 'b': 2, 'c': 3}
Like cache.set()
, set_many()
takes an optional timeout
parameter.
On supported backends (memcached), set_many()
returns a list of keys that
failed to be inserted.
-
cache.
delete
(key, version=None)¶
You can delete keys explicitly with delete()
to clear the cache for a
particular object:
>>> cache.delete("a")
True
delete()
returns True
if the key was successfully deleted, False
otherwise.
-
cache.
delete_many
(keys, version=None)¶
If you want to clear a bunch of keys at once, delete_many()
can take a list
of keys to be cleared:
>>> cache.delete_many(["a", "b", "c"])
-
cache.
clear
()¶
Finally, if you want to delete all the keys in the cache, use
cache.clear()
. Be careful with this; clear()
will remove everything
from the cache, not just the keys set by your application:
>>> cache.clear()
-
cache.
touch
(key, timeout=DEFAULT_TIMEOUT, version=None)¶
cache.touch()
sets a new expiration for a key. For example, to update a key
to expire 10 seconds from now:
>>> cache.touch("a", 10)
True
Like other methods, the timeout
argument is optional and defaults to the
TIMEOUT
option of the appropriate backend in the CACHES
setting.
touch()
returns True
if the key was successfully touched, False
otherwise.
-
cache.
incr
(key, delta=1, version=None)¶
-
cache.
decr
(key, delta=1, version=None)¶
You can also increment or decrement a key that already exists using the
incr()
or decr()
methods, respectively. By default, the existing cache
value will be incremented or decremented by 1. Other increment/decrement values
can be specified by providing an argument to the increment/decrement call. A
ValueError will be raised if you attempt to increment or decrement a
nonexistent cache key:
>>> cache.set("num", 1)
>>> cache.incr("num")
2
>>> cache.incr("num", 10)
12
>>> cache.decr("num")
11
>>> cache.decr("num", 5)
6
Note
incr()
/decr()
methods are not guaranteed to be atomic. On those
backends that support atomic increment/decrement (most notably, the
memcached backend), increment and decrement operations will be atomic.
However, if the backend doesn’t natively provide an increment/decrement
operation, it will be implemented using a two-step retrieve/update.
-
cache.
close
()¶
You can close the connection to your cache with close()
if implemented by
the cache backend.
>>> cache.close()
Note
For caches that don’t implement close
methods it is a no-op.
Note
The async variants of base methods are prefixed with a
, e.g.
cache.aadd()
or cache.adelete_many()
. See Asynchronous support
for more details.
Cache key prefixing¶
If you are sharing a cache instance between servers, or between your production and development environments, it’s possible for data cached by one server to be used by another server. If the format of cached data is different between servers, this can lead to some very hard to diagnose problems.
To prevent this, Django provides the ability to prefix all cache keys
used by a server. When a particular cache key is saved or retrieved,
Django will automatically prefix the cache key with the value of the
KEY_PREFIX
cache setting.
By ensuring each Django instance has a different
KEY_PREFIX
, you can ensure that there will be no
collisions in cache values.
Cache versioning¶
When you change running code that uses cached values, you may need to purge any existing cached values. The easiest way to do this is to flush the entire cache, but this can lead to the loss of cache values that are still valid and useful.
Django provides a better way to target individual cache values.
Django’s cache framework has a system-wide version identifier,
specified using the VERSION
cache setting.
The value of this setting is automatically combined with the cache
prefix and the user-provided cache key to obtain the final cache key.
By default, any key request will automatically include the site
default cache key version. However, the primitive cache functions all
include a version
argument, so you can specify a particular cache
key version to set or get. For example:
>>> # Set version 2 of a cache key
>>> cache.set("my_key", "hello world!", version=2)
>>> # Get the default version (assuming version=1)
>>> cache.get("my_key")
None
>>> # Get version 2 of the same key
>>> cache.get("my_key", version=2)
'hello world!'
The version of a specific key can be incremented and decremented using
the incr_version()
and decr_version()
methods. This
enables specific keys to be bumped to a new version, leaving other
keys unaffected. Continuing our previous example:
>>> # Increment the version of 'my_key'
>>> cache.incr_version("my_key")
>>> # The default version still isn't available
>>> cache.get("my_key")
None
# Version 2 isn't available, either
>>> cache.get("my_key", version=2)
None
>>> # But version 3 *is* available
>>> cache.get("my_key", version=3)
'hello world!'
Cache key transformation¶
As described in the previous two sections, the cache key provided by a user is not used verbatim – it is combined with the cache prefix and key version to provide a final cache key. By default, the three parts are joined using colons to produce a final string:
def make_key(key, key_prefix, version):
return "%s:%s:%s" % (key_prefix, version, key)
If you want to combine the parts in different ways, or apply other processing to the final key (e.g., taking a hash digest of the key parts), you can provide a custom key function.
The KEY_FUNCTION
cache setting
specifies a dotted-path to a function matching the prototype of
make_key()
above. If provided, this custom key function will
be used instead of the default key combining function.
Cache key warnings¶
Memcached, the most commonly-used production cache backend, does not allow
cache keys longer than 250 characters or containing whitespace or control
characters, and using such keys will cause an exception. To encourage
cache-portable code and minimize unpleasant surprises, the other built-in cache
backends issue a warning (django.core.cache.backends.base.CacheKeyWarning
)
if a key is used that would cause an error on memcached.
If you are using a production backend that can accept a wider range of keys (a
custom backend, or one of the non-memcached built-in backends), and want to use
this wider range without warnings, you can silence CacheKeyWarning
with
this code in the management
module of one of your
INSTALLED_APPS
:
import warnings
from django.core.cache import CacheKeyWarning
warnings.simplefilter("ignore", CacheKeyWarning)
If you want to instead provide custom key validation logic for one of the
built-in backends, you can subclass it, override just the validate_key
method, and follow the instructions for using a custom cache backend. For
instance, to do this for the locmem
backend, put this code in a module:
from django.core.cache.backends.locmem import LocMemCache
class CustomLocMemCache(LocMemCache):
def validate_key(self, key):
"""Custom validation, raising exceptions or warnings as needed."""
...
…and use the dotted Python path to this class in the
BACKEND
portion of your CACHES
setting.
Asynchronous support¶
Django has developing support for asynchronous cache backends, but does not yet support asynchronous caching. It will be coming in a future release.
django.core.cache.backends.base.BaseCache
has async variants of all
base methods. By convention, the asynchronous versions
of all methods are prefixed with a
. By default, the arguments for both
variants are the same:
>>> await cache.aset("num", 1)
>>> await cache.ahas_key("num")
True
Downstream caches¶
So far, this document has focused on caching your own data. But another type of caching is relevant to web development, too: caching performed by “downstream” caches. These are systems that cache pages for users even before the request reaches your website.
Here are a few examples of downstream caches:
- When using HTTP, your ISP may cache
certain pages, so if you requested a page from
http://example.com/
, your ISP would send you the page without having to access example.com directly. The maintainers of example.com have no knowledge of this caching; the ISP sits between example.com and your web browser, handling all of the caching transparently. Such caching is not possible under HTTPS as it would constitute a man-in-the-middle attack. - Your Django website may sit behind a proxy cache, such as Squid Web Proxy Cache (http://www.squid-cache.org/), that caches pages for performance. In this case, each request first would be handled by the proxy, and it would be passed to your application only if needed.
- Your web browser caches pages, too. If a web page sends out the appropriate headers, your browser will use the local cached copy for subsequent requests to that page, without even contacting the web page again to see whether it has changed.
Downstream caching is a nice efficiency boost, but there’s a danger to it: Many web pages’ contents differ based on authentication and a host of other variables, and cache systems that blindly save pages based purely on URLs could expose incorrect or sensitive data to subsequent visitors to those pages.
For example, if you operate a web email system, then the contents of the “inbox” page depend on which user is logged in. If an ISP blindly cached your site, then the first user who logged in through that ISP would have their user-specific inbox page cached for subsequent visitors to the site. That’s not cool.
Fortunately, HTTP provides a solution to this problem. A number of HTTP headers exist to instruct downstream caches to differ their cache contents depending on designated variables, and to tell caching mechanisms not to cache particular pages. We’ll look at some of these headers in the sections that follow.
Using Vary
headers¶
The Vary
header defines which request headers a cache
mechanism should take into account when building its cache key. For example, if
the contents of a web page depend on a user’s language preference, the page is
said to “vary on language.”
By default, Django’s cache system creates its cache keys using the requested
fully-qualified URL – e.g.,
"https://www.example.com/stories/2005/?order_by=author"
. This means every
request to that URL will use the same cached version, regardless of user-agent
differences such as cookies or language preferences. However, if this page
produces different content based on some difference in request headers – such
as a cookie, or a language, or a user-agent – you’ll need to use the Vary
header to tell caching mechanisms that the page output depends on those things.
To do this in Django, use the convenient
django.views.decorators.vary.vary_on_headers()
view decorator, like so:
from django.views.decorators.vary import vary_on_headers
@vary_on_headers("User-Agent")
def my_view(request): ...
In this case, a caching mechanism (such as Django’s own cache middleware) will cache a separate version of the page for each unique user-agent.
The advantage to using the vary_on_headers
decorator rather than manually
setting the Vary
header (using something like response.headers['Vary'] =
'user-agent'
) is that the decorator adds to the Vary
header (which may
already exist), rather than setting it from scratch and potentially overriding
anything that was already in there.
You can pass multiple headers to vary_on_headers()
:
@vary_on_headers("User-Agent", "Cookie")
def my_view(request): ...
This tells downstream caches to vary on both, which means each combination of
user-agent and cookie will get its own cache value. For example, a request with
the user-agent Mozilla
and the cookie value foo=bar
will be considered
different from a request with the user-agent Mozilla
and the cookie value
foo=ham
.
Because varying on cookie is so common, there’s a
django.views.decorators.vary.vary_on_cookie()
decorator. These two views
are equivalent:
@vary_on_cookie
def my_view(request): ...
@vary_on_headers("Cookie")
def my_view(request): ...
The headers you pass to vary_on_headers
are not case sensitive;
"User-Agent"
is the same thing as "user-agent"
.
You can also use a helper function, django.utils.cache.patch_vary_headers()
,
directly. This function sets, or adds to, the Vary header
. For example:
from django.shortcuts import render
from django.utils.cache import patch_vary_headers
def my_view(request):
...
response = render(request, "template_name", context)
patch_vary_headers(response, ["Cookie"])
return response
patch_vary_headers
takes an HttpResponse
instance as
its first argument and a list/tuple of case-insensitive header names as its
second argument.
For more on Vary headers, see the official Vary spec.
Controlling cache: Using other headers¶
Other problems with caching are the privacy of data and the question of where data should be stored in a cascade of caches.
A user usually faces two kinds of caches: their own browser cache (a private cache) and their provider’s cache (a public cache). A public cache is used by multiple users and controlled by someone else. This poses problems with sensitive data–you don’t want, say, your bank account number stored in a public cache. So web applications need a way to tell caches which data is private and which is public.
The solution is to indicate a page’s cache should be “private.” To do this in
Django, use the cache_control()
view
decorator. Example:
from django.views.decorators.cache import cache_control
@cache_control(private=True)
def my_view(request): ...
This decorator takes care of sending out the appropriate HTTP header behind the scenes.
Note that the cache control settings “private” and “public” are mutually
exclusive. The decorator ensures that the “public” directive is removed if
“private” should be set (and vice versa). An example use of the two directives
would be a blog site that offers both private and public entries. Public
entries may be cached on any shared cache. The following code uses
patch_cache_control()
, the manual way to modify the
cache control header (it is internally called by the
cache_control()
decorator):
from django.views.decorators.cache import patch_cache_control
from django.views.decorators.vary import vary_on_cookie
@vary_on_cookie
def list_blog_entries_view(request):
if request.user.is_anonymous:
response = render_only_public_entries()
patch_cache_control(response, public=True)
else:
response = render_private_and_public_entries(request.user)
patch_cache_control(response, private=True)
return response
You can control downstream caches in other ways as well (see RFC 9111 for details on HTTP caching). For example, even if you don’t use Django’s server-side cache framework, you can still tell clients to cache a view for a certain amount of time with the max-age directive:
from django.views.decorators.cache import cache_control
@cache_control(max_age=3600)
def my_view(request): ...
(If you do use the caching middleware, it already sets the max-age
with
the value of the CACHE_MIDDLEWARE_SECONDS
setting. In that case,
the custom max_age
from the
cache_control()
decorator will take
precedence, and the header values will be merged correctly.)
Any valid Cache-Control
response directive is valid in cache_control()
.
Here are some more examples:
no_transform=True
must_revalidate=True
stale_while_revalidate=num_seconds
no_cache=True
The full list of known directives can be found in the IANA registry (note that not all of them apply to responses).
If you want to use headers to disable caching altogether,
never_cache()
is a view decorator that
adds headers to ensure the response won’t be cached by browsers or other
caches. Example:
from django.views.decorators.cache import never_cache
@never_cache
def myview(request): ...
Order of MIDDLEWARE
¶
If you use caching middleware, it’s important to put each half in the right
place within the MIDDLEWARE
setting. That’s because the cache
middleware needs to know which headers by which to vary the cache storage.
Middleware always adds something to the Vary
response header when it can.
UpdateCacheMiddleware
runs during the response phase, where middleware is
run in reverse order, so an item at the top of the list runs last during the
response phase. Thus, you need to make sure that UpdateCacheMiddleware
appears before any other middleware that might add something to the Vary
header. The following middleware modules do so:
SessionMiddleware
addsCookie
GZipMiddleware
addsAccept-Encoding
LocaleMiddleware
addsAccept-Language
FetchFromCacheMiddleware
, on the other hand, runs during the request phase,
where middleware is applied first-to-last, so an item at the top of the list
runs first during the request phase. The FetchFromCacheMiddleware
also
needs to run after other middleware updates the Vary
header, so
FetchFromCacheMiddleware
must be after any item that does so.