Conditional View Processing

HTTP clients can send a number of headers to tell the server about copies of a resource that they have already seen. This is commonly used when retrieving a Web page (using an HTTP GET request) to avoid sending all the data for something the client has already retrieved. However, the same headers can be used for all HTTP methods (POST, PUT, DELETE, etc.).

For each page (response) that Django sends back from a view, it might provide two HTTP headers: the ETag header and the Last-Modified header. These headers are optional on HTTP responses. They can be set by your view function, or you can rely on the ConditionalGetMiddleware middleware to set the ETag header.

When the client next requests the same resource, it might send along a header such as either If-modified-since or If-unmodified-since, containing the date of the last modification time it was sent, or either If-match or If-none-match, containing the last ETag it was sent. If the current version of the page matches the ETag sent by the client, or if the resource has not been modified, a 304 status code can be sent back, instead of a full response, telling the client that nothing has changed. Depending on the header, if the page has been modified or does not match the ETag sent by the client, a 412 status code (Precondition Failed) may be returned.

When you need more fine-grained control you may use per-view conditional processing functions.

The condition decorator

Sometimes (in fact, quite often) you can create functions to rapidly compute the ETag value or the last-modified time for a resource, without needing to do all the computations needed to construct the full view. Django can then use these functions to provide an “early bailout” option for the view processing. Telling the client that the content has not been modified since the last request, perhaps.

These two functions are passed as parameters to the django.views.decorators.http.condition decorator. This decorator uses the two functions (you only need to supply one, if you can’t compute both quantities easily and quickly) to work out if the headers in the HTTP request match those on the resource. If they don’t match, a new copy of the resource must be computed and your normal view is called.

The condition decorator’s signature looks like this:

condition(etag_func=None, last_modified_func=None)

The two functions, to compute the ETag and the last modified time, will be passed the incoming request object and the same parameters, in the same order, as the view function they are helping to wrap. The function passed last_modified_func should return a standard datetime value specifying the last time the resource was modified, or None if the resource doesn’t exist. The function passed to the etag decorator should return a string representing the ETag for the resource, or None if it doesn’t exist.

The decorator sets the ETag and Last-Modified headers on the response if they are not already set by the view and if the request’s method is safe (GET or HEAD).

Using this feature usefully is probably best explained with an example. Suppose you have this pair of models, representing a small blog system:

import datetime
from django.db import models

class Blog(models.Model):
    ...

class Entry(models.Model):
    blog = models.ForeignKey(Blog, on_delete=models.CASCADE)
    published = models.DateTimeField(default=datetime.datetime.now)
    ...

If the front page, displaying the latest blog entries, only changes when you add a new blog entry, you can compute the last modified time very quickly. You need the latest published date for every entry associated with that blog. One way to do this would be:

def latest_entry(request, blog_id):
    return Entry.objects.filter(blog=blog_id).latest("published").published

You can then use this function to provide early detection of an unchanged page for your front page view:

from django.views.decorators.http import condition

@condition(last_modified_func=latest_entry)
def front_page(request, blog_id):
    ...

Be careful with the order of decorators

When condition() returns a conditional response, any decorators below it will be skipped and won’t apply to the response. Therefore, any decorators that need to apply to both the regular view response and a conditional response must be above condition(). In particular, vary_on_cookie(), vary_on_headers(), and cache_control() should come first because RFC 7232 requires that the headers they set be present on 304 responses.

Shortcuts for only computing one value

As a general rule, if you can provide functions to compute both the ETag and the last modified time, you should do so. You don’t know which headers any given HTTP client will send you, so be prepared to handle both. However, sometimes only one value is easy to compute and Django provides decorators that handle only ETag or only last-modified computations.

The django.views.decorators.http.etag and django.views.decorators.http.last_modified decorators are passed the same type of functions as the condition decorator. Their signatures are:

etag(etag_func)
last_modified(last_modified_func)

We could write the earlier example, which only uses a last-modified function, using one of these decorators:

@last_modified(latest_entry)
def front_page(request, blog_id):
    ...

…or:

def front_page(request, blog_id):
    ...
front_page = last_modified(latest_entry)(front_page)

Use condition when testing both conditions

It might look nicer to some people to try and chain the etag and last_modified decorators if you want to test both preconditions. However, this would lead to incorrect behavior.

# Bad code. Don't do this!
@etag(etag_func)
@last_modified(last_modified_func)
def my_view(request):
    # ...

# End of bad code.

The first decorator doesn’t know anything about the second and might answer that the response is not modified even if the second decorators would determine otherwise. The condition decorator uses both callback functions simultaneously to work out the right action to take.

Using the decorators with other HTTP methods

The condition decorator is useful for more than only GET and HEAD requests (HEAD requests are the same as GET in this situation). It can also be used to provide checking for POST, PUT and DELETE requests. In these situations, the idea isn’t to return a “not modified” response, but to tell the client that the resource they are trying to change has been altered in the meantime.

For example, consider the following exchange between the client and server:

  1. Client requests /foo/.
  2. Server responds with some content with an ETag of "abcd1234".
  3. Client sends an HTTP PUT request to /foo/ to update the resource. It also sends an If-Match: "abcd1234" header to specify the version it is trying to update.
  4. Server checks to see if the resource has changed, by computing the ETag the same way it does for a GET request (using the same function). If the resource has changed, it will return a 412 status code, meaning “precondition failed”.
  5. Client sends a GET request to /foo/, after receiving a 412 response, to retrieve an updated version of the content before updating it.

The important thing this example shows is that the same functions can be used to compute the ETag and last modification values in all situations. In fact, you should use the same functions, so that the same values are returned every time.

Validator headers with non-safe request methods

The condition decorator only sets validator headers (ETag and Last-Modified) for safe HTTP methods, i.e. GET and HEAD. If you wish to return them in other cases, set them in your view. See RFC 7231#section-4.3.4 to learn about the distinction between setting a validator header in response to requests made with PUT versus POST.

Comparison with middleware conditional processing

Django provides conditional GET handling via django.middleware.http.ConditionalGetMiddleware. While being suitable for many situations, the middleware has limitations for advanced usage:

  • It’s applied globally to all views in your project.
  • It doesn’t save you from generating the response, which may be expensive.
  • It’s only appropriate for HTTP GET requests.

You should choose the most appropriate tool for your particular problem here. If you have a way to compute ETags and modification times quickly and if some view takes a while to generate the content, you should consider using the condition decorator described in this document. If everything already runs fairly quickly, stick to using the middleware and the amount of network traffic sent back to the clients will still be reduced if the view hasn’t changed.

Back to Top