Source code for django.utils.text

import html.entities
import re
import unicodedata
import warnings
from gzip import GzipFile
from io import BytesIO

from django.core.exceptions import SuspiciousFileOperation
from django.utils.deprecation import RemovedInDjango40Warning
from django.utils.functional import SimpleLazyObject, keep_lazy_text, lazy
from django.utils.regex_helper import _lazy_re_compile
from django.utils.translation import gettext as _, gettext_lazy, pgettext


@keep_lazy_text
def capfirst(x):
    """Capitalize the first letter of a string."""
    return x and str(x)[0].upper() + str(x)[1:]


# ----- Begin security-related performance workaround -----

# We used to have, below
#
# re_words = _lazy_re_compile(r"<[^>]+?>|([^<>\s]+)", re.S)
#
# But it was shown that this regex, in the way we use it here, has some
# catastrophic edge-case performance features. Namely, when it is applied to
# text with only open brackets "<<<...". The class below provides the services
# and correct answers for the use cases, but in these edge cases does it much
# faster.
re_notag = _lazy_re_compile(r"([^<>\s]+)", re.S)
re_prt = _lazy_re_compile(r"<|([^<>\s]+)", re.S)


class WordsRegex:
    @staticmethod
    def search(text, pos):
        # Look for "<" or a non-tag word.
        partial = re_prt.search(text, pos)
        if partial is None or partial[1] is not None:
            return partial

        # "<" was found, look for a closing ">".
        end = text.find(">", partial.end(0))
        if end < 0:
            # ">" cannot be found, look for a word.
            return re_notag.search(text, pos + 1)
        else:
            # "<" followed by a ">" was found -- fake a match.
            end += 1
            return FakeMatch(text[partial.start(0): end], end)


class FakeMatch:
    __slots__ = ["_text", "_end"]

    def end(self, group=0):
        assert group == 0, "This specific object takes only group=0"
        return self._end

    def __getitem__(self, group):
        if group == 1:
            return None
        assert group == 0, "This specific object takes only group in {0,1}"
        return self._text

    def __init__(self, text, end):
        self._text, self._end = text, end


# ----- End security-related performance workaround -----

# Set up regular expressions.
re_words = WordsRegex
re_chars = _lazy_re_compile(r'<[^>]+?>|(.)', re.S)
re_tag = _lazy_re_compile(r'<(/)?(\S+?)(?:(\s*/)|\s.*?)?>', re.S)
re_newlines = _lazy_re_compile(r'\r\n|\r')  # Used in normalize_newlines
re_camel_case = _lazy_re_compile(r'(((?<=[a-z])[A-Z])|([A-Z](?![A-Z]|$)))')


@keep_lazy_text
def wrap(text, width):
    """
    A word-wrap function that preserves existing line breaks. Expects that
    existing line breaks are posix newlines.

    Preserve all white space except added line breaks consume the space on
    which they break the line.

    Don't wrap long words, thus the output text may have lines longer than
    ``width``.
    """
    def _generator():
        for line in text.splitlines(True):  # True keeps trailing linebreaks
            max_width = min((line.endswith('\n') and width + 1 or width), width)
            while len(line) > max_width:
                space = line[:max_width + 1].rfind(' ') + 1
                if space == 0:
                    space = line.find(' ') + 1
                    if space == 0:
                        yield line
                        line = ''
                        break
                yield '%s\n' % line[:space - 1]
                line = line[space:]
                max_width = min((line.endswith('\n') and width + 1 or width), width)
            if line:
                yield line
    return ''.join(_generator())


class Truncator(SimpleLazyObject):
    """
    An object used to truncate text, either by characters or words.

    When truncating HTML text (either chars or words), input will be limited to
    at most `MAX_LENGTH_HTML` characters.
    """

    # 5 million characters are approximately 4000 text pages or 3 web pages.
    MAX_LENGTH_HTML = 5_000_000

    def __init__(self, text):
        super().__init__(lambda: str(text))

    def add_truncation_text(self, text, truncate=None):
        if truncate is None:
            truncate = pgettext(
                'String to return when truncating text',
                '%(truncated_text)s…')
        if '%(truncated_text)s' in truncate:
            return truncate % {'truncated_text': text}
        # The truncation text didn't contain the %(truncated_text)s string
        # replacement argument so just append it to the text.
        if text.endswith(truncate):
            # But don't append the truncation text if the current text already
            # ends in this.
            return text
        return '%s%s' % (text, truncate)

    def chars(self, num, truncate=None, html=False):
        """
        Return the text truncated to be no longer than the specified number
        of characters.

        `truncate` specifies what should be used to notify that the string has
        been truncated, defaulting to a translatable string of an ellipsis.
        """
        self._setup()
        length = int(num)
        text = unicodedata.normalize('NFC', self._wrapped)

        # Calculate the length to truncate to (max length - end_text length)
        truncate_len = length
        for char in self.add_truncation_text('', truncate):
            if not unicodedata.combining(char):
                truncate_len -= 1
                if truncate_len == 0:
                    break
        if html:
            return self._truncate_html(length, truncate, text, truncate_len, False)
        return self._text_chars(length, truncate, text, truncate_len)

    def _text_chars(self, length, truncate, text, truncate_len):
        """Truncate a string after a certain number of chars."""
        s_len = 0
        end_index = None
        for i, char in enumerate(text):
            if unicodedata.combining(char):
                # Don't consider combining characters
                # as adding to the string length
                continue
            s_len += 1
            if end_index is None and s_len > truncate_len:
                end_index = i
            if s_len > length:
                # Return the truncated string
                return self.add_truncation_text(text[:end_index or 0],
                                                truncate)

        # Return the original string since no truncation was necessary
        return text

    def words(self, num, truncate=None, html=False):
        """
        Truncate a string after a certain number of words. `truncate` specifies
        what should be used to notify that the string has been truncated,
        defaulting to ellipsis.
        """
        self._setup()
        length = int(num)
        if html:
            return self._truncate_html(length, truncate, self._wrapped, length, True)
        return self._text_words(length, truncate)

    def _text_words(self, length, truncate):
        """
        Truncate a string after a certain number of words.

        Strip newlines in the string.
        """
        words = self._wrapped.split()
        if len(words) > length:
            words = words[:length]
            return self.add_truncation_text(' '.join(words), truncate)
        return ' '.join(words)

    def _truncate_html(self, length, truncate, text, truncate_len, words):
        """
        Truncate HTML to a certain number of chars (not counting tags and
        comments), or, if words is True, then to a certain number of words.
        Close opened tags if they were correctly closed in the given HTML.

        Preserve newlines in the HTML.
        """
        if words and length <= 0:
            return ''

        size_limited = False
        if len(text) > self.MAX_LENGTH_HTML:
            text = text[: self.MAX_LENGTH_HTML]
            size_limited = True

        html4_singlets = (
            'br', 'col', 'link', 'base', 'img',
            'param', 'area', 'hr', 'input'
        )

        # Count non-HTML chars/words and keep note of open tags
        pos = 0
        end_text_pos = 0
        current_len = 0
        open_tags = []

        regex = re_words if words else re_chars

        while current_len <= length:
            m = regex.search(text, pos)
            if not m:
                # Checked through whole string
                break
            pos = m.end(0)
            if m[1]:
                # It's an actual non-HTML word or char
                current_len += 1
                if current_len == truncate_len:
                    end_text_pos = pos
                continue
            # Check for tag
            tag = re_tag.match(m[0])
            if not tag or current_len >= truncate_len:
                # Don't worry about non tags or tags after our truncate point
                continue
            closing_tag, tagname, self_closing = tag.groups()
            # Element names are always case-insensitive
            tagname = tagname.lower()
            if self_closing or tagname in html4_singlets:
                pass
            elif closing_tag:
                # Check for match in open tags list
                try:
                    i = open_tags.index(tagname)
                except ValueError:
                    pass
                else:
                    # SGML: An end tag closes, back to the matching start tag,
                    # all unclosed intervening start tags with omitted end tags
                    open_tags = open_tags[i + 1:]
            else:
                # Add it to the start of the open tags list
                open_tags.insert(0, tagname)

        truncate_text = self.add_truncation_text("", truncate)

        if current_len <= length:
            if size_limited and truncate_text:
                text += truncate_text
            return text

        out = text[:end_text_pos]
        if truncate_text:
            out += truncate_text
        # Close any tags still open
        for tag in open_tags:
            out += '</%s>' % tag
        # Return string
        return out


@keep_lazy_text
def get_valid_filename(name):
    """
    Return the given string converted to a string that can be used for a clean
    filename. Remove leading and trailing spaces; convert other spaces to
    underscores; and remove anything that is not an alphanumeric, dash,
    underscore, or dot.
    >>> get_valid_filename("john's portrait in 2004.jpg")
    'johns_portrait_in_2004.jpg'
    """
    s = str(name).strip().replace(' ', '_')
    s = re.sub(r'(?u)[^-\w.]', '', s)
    if s in {'', '.', '..'}:
        raise SuspiciousFileOperation("Could not derive file name from '%s'" % name)
    return s


@keep_lazy_text
def get_text_list(list_, last_word=gettext_lazy('or')):
    """
    >>> get_text_list(['a', 'b', 'c', 'd'])
    'a, b, c or d'
    >>> get_text_list(['a', 'b', 'c'], 'and')
    'a, b and c'
    >>> get_text_list(['a', 'b'], 'and')
    'a and b'
    >>> get_text_list(['a'])
    'a'
    >>> get_text_list([])
    ''
    """
    if not list_:
        return ''
    if len(list_) == 1:
        return str(list_[0])
    return '%s %s %s' % (
        # Translators: This string is used as a separator between list elements
        _(', ').join(str(i) for i in list_[:-1]), str(last_word), str(list_[-1])
    )


@keep_lazy_text
def normalize_newlines(text):
    """Normalize CRLF and CR newlines to just LF."""
    return re_newlines.sub('\n', str(text))


@keep_lazy_text
def phone2numeric(phone):
    """Convert a phone number with letters into its numeric equivalent."""
    char2number = {
        'a': '2', 'b': '2', 'c': '2', 'd': '3', 'e': '3', 'f': '3', 'g': '4',
        'h': '4', 'i': '4', 'j': '5', 'k': '5', 'l': '5', 'm': '6', 'n': '6',
        'o': '6', 'p': '7', 'q': '7', 'r': '7', 's': '7', 't': '8', 'u': '8',
        'v': '8', 'w': '9', 'x': '9', 'y': '9', 'z': '9',
    }
    return ''.join(char2number.get(c, c) for c in phone.lower())


# From http://www.xhaus.com/alan/python/httpcomp.html#gzip
# Used with permission.
def compress_string(s):
    zbuf = BytesIO()
    with GzipFile(mode='wb', compresslevel=6, fileobj=zbuf, mtime=0) as zfile:
        zfile.write(s)
    return zbuf.getvalue()


class StreamingBuffer(BytesIO):
    def read(self):
        ret = self.getvalue()
        self.seek(0)
        self.truncate()
        return ret


# Like compress_string, but for iterators of strings.
def compress_sequence(sequence):
    buf = StreamingBuffer()
    with GzipFile(mode='wb', compresslevel=6, fileobj=buf, mtime=0) as zfile:
        # Output headers...
        yield buf.read()
        for item in sequence:
            zfile.write(item)
            data = buf.read()
            if data:
                yield data
    yield buf.read()


# Expression to match some_token and some_token="with spaces" (and similarly
# for single-quoted strings).
smart_split_re = _lazy_re_compile(r"""
    ((?:
        [^\s'"]*
        (?:
            (?:"(?:[^"\\]|\\.)*" | '(?:[^'\\]|\\.)*')
            [^\s'"]*
        )+
    ) | \S+)
""", re.VERBOSE)


def smart_split(text):
    r"""
    Generator that splits a string by spaces, leaving quoted phrases together.
    Supports both single and double quotes, and supports escaping quotes with
    backslashes. In the output, strings will keep their initial and trailing
    quote marks and escaped quotes will remain escaped (the results can then
    be further processed with unescape_string_literal()).

    >>> list(smart_split(r'This is "a person\'s" test.'))
    ['This', 'is', '"a person\\\'s"', 'test.']
    >>> list(smart_split(r"Another 'person\'s' test."))
    ['Another', "'person\\'s'", 'test.']
    >>> list(smart_split(r'A "\"funky\" style" test.'))
    ['A', '"\\"funky\\" style"', 'test.']
    """
    for bit in smart_split_re.finditer(str(text)):
        yield bit[0]


def _replace_entity(match):
    text = match[1]
    if text[0] == '#':
        text = text[1:]
        try:
            if text[0] in 'xX':
                c = int(text[1:], 16)
            else:
                c = int(text)
            return chr(c)
        except ValueError:
            return match[0]
    else:
        try:
            return chr(html.entities.name2codepoint[text])
        except KeyError:
            return match[0]


_entity_re = _lazy_re_compile(r"&(#?[xX]?(?:[0-9a-fA-F]+|\w{1,8}));")


@keep_lazy_text
def unescape_entities(text):
    warnings.warn(
        'django.utils.text.unescape_entities() is deprecated in favor of '
        'html.unescape().',
        RemovedInDjango40Warning, stacklevel=2,
    )
    return _entity_re.sub(_replace_entity, str(text))


@keep_lazy_text
def unescape_string_literal(s):
    r"""
    Convert quoted string literals to unquoted strings with escaped quotes and
    backslashes unquoted::

        >>> unescape_string_literal('"abc"')
        'abc'
        >>> unescape_string_literal("'abc'")
        'abc'
        >>> unescape_string_literal('"a \"bc\""')
        'a "bc"'
        >>> unescape_string_literal("'\'ab\' c'")
        "'ab' c"
    """
    if s[0] not in "\"'" or s[-1] != s[0]:
        raise ValueError("Not a string literal: %r" % s)
    quote = s[0]
    return s[1:-1].replace(r'\%s' % quote, quote).replace(r'\\', '\\')


[docs]@keep_lazy_text def slugify(value, allow_unicode=False): """ Convert to ASCII if 'allow_unicode' is False. Convert spaces or repeated dashes to single dashes. Remove characters that aren't alphanumerics, underscores, or hyphens. Convert to lowercase. Also strip leading and trailing whitespace, dashes, and underscores. """ value = str(value) if allow_unicode: value = unicodedata.normalize('NFKC', value) else: value = unicodedata.normalize('NFKD', value).encode('ascii', 'ignore').decode('ascii') value = re.sub(r'[^\w\s-]', '', value.lower()) return re.sub(r'[-\s]+', '-', value).strip('-_')
def camel_case_to_spaces(value): """ Split CamelCase and convert to lowercase. Strip surrounding whitespace. """ return re_camel_case.sub(r' \1', value).strip().lower() def _format_lazy(format_string, *args, **kwargs): """ Apply str.format() on 'format_string' where format_string, args, and/or kwargs might be lazy. """ return format_string.format(*args, **kwargs) format_lazy = lazy(_format_lazy, str)
Back to Top